Showing posts with label Nghi Son Refinery. Show all posts
Showing posts with label Nghi Son Refinery. Show all posts

Monday, October 20, 2008

FOSSILS INTO FUELS: Basic Knowlegde

Crude oil, natural gas and coal are fossil fuels. Fossil fuels are very precious resources because they are non-renewable (once they're used, that's it!). We can also make lots of organic chemicals from them, needed to make products such as paints, detergents, polymers (including plastics), cosmetics and some medicines.

Fossil fuels were formed from the fossillized remains of dead plants and animals that once lived millions of years ago. Oil and natural gas are the products of the deep burial and decomposition of dead plants and animals. Heat and pressure, in the absence of oxygen, transform the decomposed material into tiny pockets of gas and crude oil. The oil and gas then migrates through the pores in the rocks to eventually collect in reservoirs.

Coal comes mainly from dead plants which have been buried and compacted beneath sediments. Most coal originated as peat in ancient swamps created many millions of years ago.

What is crude oil?
Crude oil is a complex mixture of hydrocarbons with small amounts of other chemicals such as sulphur. The crude oil is useless as a mixture and must be sent to an oil refinery to be separated. Crude oils from different parts of the world, or even from different depths in the same oilfield, contain different mixtures of hydrocarbons and other compounds. This is why they vary from light coloured volatile liquids to thick, dark oils.

What is natural gas?
Natural gas is a mixture of hydrocarbons with small molecules. These molecules are made of atoms of carbon and hydrogen. For example, natural gas used in the home is mainly methane, CH 4.
What is a hydrocarbon?
Hydrocarbons only contain hydrogen and carbon atoms. There are two main chemical families of hydrocarbons - the alkanes and the alkenes. Thousands of synthetic products can be manufactured from hydrocarbons with many different properties. Click here for some more info on polymers and plastics.

Source: moorlandschool.co.uk

Read full story. . .

Oil Refinery: Basic Knowledge

A refinery is a factory. A refinery takes a raw material (crude oil) and transforms it into petrol and hundreds of other useful products. A typical large refinery costs billions of pounds to build and millions more to run and upgrade. It runs around the clock 365 days a year, employs hundreds of people and occupies as much land as several hundred football pitches.

A REFINERY breaks crude oil down into its various components, which then are selectively changed into new products. This process takes place inside a maze of pipes and vessels. The refinery is operated from a highly automated control room.

All refineries perform three basic steps:

  • Separation (fractional distillation)
  • Conversion (cracking and rearranging the molecules)
  • Treatment
Separation: fractional distillation

Modern separation involves piping crude oil through hot furnaces. The resulting liquids and vapours are passed into distillation towers:



FRACTION B Pt oC Number of carbons Uses









»Refinery gas
1-4 Bottled gas, fuels

»Petrol 40 ~8 Fuel for cars

»Naptha 110 ~10 Raw material for chemicals and plastics.

»Kerosine 180 ~15 Fuel for Aeroplanes

»Diesel 250 ~20 Fuel for cars and lorries

»Oils 340 ~35 Fuel for Power Stations, Lubricants and grease
Hot crude » »Bitumen 400+ 40+ Road surfacing.
  • It is important to realise that the column is hot at the bottom and cool at the top.
  • The crude oil separates into fractions according to weight and boiling point.
  • The lightest fractions, including petrol and liquid petroleum gas (LPG), vapourise and rise to the top of the tower.
  • Kerosine (aviation fuel) and diesel oil, stay in the middle of the tower
  • Heavier liquids separate lower down.
  • The heaviest fractions with the highest boiling points settle at the very bottom.
TRENDS AS WE UP AND DOWN THE COLUMN

The following table shows how the behaviour of the hydrocarbon molecules alter:

AT THE TOP OF THE COLUMN
AT THE BOTTOM OF THE COLUMN



  • Short carbon chains

  • Long carbon chains
  • Light molecules

  • Heavy molecules
  • Low boiling points

  • High boiling points
  • Gases & very runny liquids

  • Thick, viscous liquids
  • Very volatile

  • Low volatility
  • Highly flammable

  • Not very flammable
  • Light colour

  • Dark colour



Petrol comes off near the top of the column. Does the list above describe petrol?
Fuel oil comes off near the bottom of the column. Does the list above describe fuel oil?

The fractions are now ready for piping to the next areas within the refinery. Some fractions require very little additional processing. However, most molecules require much more processing to become high-value products.

Conversion: cracking and rearranging molecules

Some fractions from the distillation towers need to be transformed into new components . This is where a refinery makes money, because the low-value fractions that aren't in great demand can be converted to petrol and other useful chemicals.

The most widely used conversion method is called cracking because it uses heat and pressure to "crack" heavy hydrocarbon molecules into lighter ones. A cracking unit consists of one or more tall, thick-walled, reactors and a network of furnaces, heat exchangers and other vessels. Catalytic cracking, or "cat cracking," is the basic petrol-making process. Using intense heat (about 600°C), low pressure and a powdered catalyst (a substance that speeds up a chemical reaction), the cat cracker can convert most of the heavy fractions into smaller more useful molecules.

Some refineries also have cokers, which use heat and moderate pressure to turn the really heavy fractions into lighter products and a hard, coal like substance that is used as an industrial fuel.

Cracking and coking are not the only forms of conversion. Other refinery processes, instead of splitting molecules, rearrange them to add value. Alkylation makes petrol components by combining some of the gaseous byproducts of cracking. The process, which essentially is cracking in reverse, takes place in a series of large, horizontal vessels.

Reforming uses heat, moderate pressure and catalysts to turn naphtha into high-octane petrol.

Treatment: the finishing touch

Today, a major portion of refining involves blending, purifying, fine-tuning and improving products to meet specific requirements. To make petrol, refinery workers carefully blend together a variety of hydrocarbons. Technicians also add performance additives and dyes that distinguish the various grades of fuel. By the time the petrol is pumped into a car it contains more than 200 hydrocarbons and additives.

Example: Petrol companies produce different blends of fuels to suit the weather. In winter, they put in more volatile hydrocarbons (with short carbon chains) and in summer they add less volatile hydrocarbons to compensate for the higher temperatures.

Source:moorlandschool.co.uk

Read full story. . .

Thursday, October 16, 2008

Vietnam starts construction on 6 billion dollar oil-refinery

May 9, 2008


NGHI SON, Vietnam (AFP) — Energy-hungry Vietnam started building its second oil refinery on Saturday, a 6.2 billion dollar complex, in a bid to feed the nation's booming economy, the State Oil company announced.


Vietnam Oil and Gas Corporation (PetroVietnam), the oil monopoly in the communist nation, set up a joint-venture with its counterparts from Japan and Kuwait to build Nghi Son refinery in the north of the country.

Vietnamese Prime Minister Nguyen Tan Dung hailed the project at the ground-breaking ceremony, saying it was the country's most important and biggest power scheme, attracting capital investment of 6.2 billion dollars.


Petrovietnam said the refinery, with a targeted capacity of up to 10 million tonnes a year, is located in Thanh Hoa province, about 200 kilometres (125 miles) south of the capital Hanoi.

Petrovietnam will hold a 25.1 percent stake, Japan's Idemitsu Kosan Co (IKC) and Kuwait Petroleum International KPI) will each hold a 35.1 percent share, and Mitsui Chemicals Inc (MCI), also of Japan, will have the remaining 4.7 percent.


The Nghi Son refinery, to be operational by 2013, will turn Kuwaiti oil into petrol, liquefied petroleum gas, diesel, kerosene and jet fuel for Vietnam, which has offshore oil reserves but currently imports petroleum products.

Dung said last month the facility would create about 10,000 jobs and the state media said around 1,000 local families will be relocated from more than 500 hectares of Gia Tinh district.


Dung Quat, the country's first refinery costing around 2.5 billion dollars, is now being built after lengthy delays in central Vietnam and is expected to produce 6.5 million tonnes a year from 2009 -- equivalent to a third of the country's needs.


"By 2013, this project combined with Dung Quat refinery would ensure 65 percent of Vietnam oil and gas demand. It will contribute to ensure the nation's energy security," the Prime Minister said.

PetroVietnam is now preparing for its third refinery project in Long Son district of southern Ba Ria-Vung Tau province.


Vietnam's economy grew at 8.5 percent a year in 2007, and its energy needs for industry, households and transport are rising annually at about twice that rate.


Last year, Vietnam spent eight billion dollars to import 12.55 million tonnes of refined oil.
Source: afp

Read full story. . .

Friday, October 10, 2008

Nghi Son Petrochemical Refinery Complex in Vietnam

Key Data:
Project
Nghi Son Petrochemical Refinery Complex
Owners
Viet Nam National Oil and Gas Group (PetroVietnam), Kuwait Petroleum International (KPI), and the Japanese companies Idemitsu Kosan Corp (IKC) and Mitsui Chemicals Inc (MCI)
Location
Nghi Son Economic Zone, in Thanh Hoa Province, Vietnam
Cost
$6.2bn
Start Up
End of 2013
Products
May include: octane unleaded gasoline, fuel oil and bitumen, polypropylene and polyethylene terephthalate (PET)
Financing
Japan Bank for International Co-operation
Feasibility Study
ABB Lummus Global
Front End Engineering and Design
Foster Wheeler Energy Limited


At the beginning of May 2008 groundwork began on what has been described as one of Vietnam's "largest and most important projects".

The Nghi Son Petrochemical Refinery Complex is set to be built in the Nghi Son Economic Zone, in Thanh Hoa Province, Vietnam.

"Major construction work will start in April 2010 with the complex becoming operational by the end of 2013."

The investment cost for the complex which includes a refinery producing up to 10mtpa of crude along with petrochemical capacity has been put at $6.2bn.

It is anticipated that the major construction work will start in April 2010 with the complex becoming operational by the end of 2013.

Project owners and financing

The Nghi Son Petrochemical Refinery Complex is a joint venture between state-owned Viet Nam National Oil and Gas Group (PetroVietnam), Kuwait Petroleum International (KPI), and the Japanese companies Idemitsu Kosan Corp (IKC) and Mitsui Chemicals Inc (MCI).

The partners hold stakes of 25.1%, 35.1%. 35.1% and 4.7% respectively. The joint venture was established during April 2008.

The Japan Bank for International Co-operation (JBIC) is providing a loan for 70% of the projects initial capital. Current paid in capital is put at $200m.

Feasibility study

At the start of 2008, US-based ABB Lummus Global was awarded a contract to prepare a detailed feasibility study of the Nghi Son Petrochemical Refinery Complex.

"Once operational, the two refineries will allow Vietnam to meet 50% of domestic demand for oil products."

A pre-feasibility study laid the ground work for a refinery with a capacity of 7mpta based on a mix of Vietnamese and Middle East crude. The wide-ranging product slate includes high octane unleaded gasoline, fuel oil and bitumen, along with the petrochemical products polypropylene and polyethylene terephthalate (PET) and associated feedstock.

ABB said that the emphasis of the detailed feasibility study would to be to establish an optimum refinery configuration to meet existing Southeast Asia product needs as well as demand for downstream petrochemical processing units. The company added that "advanced modelling techniques such as linear programming and cash flow calculations will be used to optimise the refinery configuration."

Front end engineering and design

In July 2008 UK-based Foster Wheeler Energy Limited announced that it had been awarded the front end engineering and design (FEED) contract for the planned Nghi Son Refinery & Petrochemical Complex. The FEED work is expected to be concluded during the fourth quarter of 2009. The value of the contract was not disclosed.

Background

Vietnam's first oil refinery is nearing completion and is due to become operational during 2009. The latest plans to develop more refining capacity are important to Vietnam as it will allow the country to secure a national energy strategy and reduce its dependence on imports of petroleum-based products.

It is anticipated that once operational, the two refineries would allow Vietnam to meet 50% of domestic demand for oil products. In addition, the Nghi Son project would contribute to the development of petrochemical and supporting services industries creating many jobs.



The country's second-largest oil refinery will be built in Thanh Hoa Province by a joint venture between the Viet Nam National Oil and Gas Corp. Kuwait Petroleum International and Japanese companies Idemitsu Kosan Corp and Mitsui Chemicals Inc.




During April 2008 the joint venture contract to establish Vietnam's second refinery was signed in Ho Chi Minh City.

Source: chemicals-technology.com

Read full story. . .

Add to Technorati Favorites

Recent Posts